Bush suggested a system he called the Memex in a 1945 article titled "As We May Think" that was printed in the Atlantic Monthly. This was an indexed, archival, microfilm machine for cross-referencing.
What was the 1945 invention of Vannevar Bush?Bush created and patented a "profile tracer" for his master's thesis. This was a mapping apparatus, like a lawnmower, to help surveyors. It had two bicycle wheels and a pen for mapping the ground it traveled on. It was the initial innovation in a series.
Why did Vannevar Bush predict the development of hypertext in 1945?Memex (1945) (1945) Vannevar Bush (1890-1974), who developed a system that we now refer to as a hypertext system in 1945, is typically regarded as the "grandfather" of hypertext. Yet Bush's Memex ("memory extender") technology was never put into practice; instead, it was simply theorized in those articles.
to know more about vannevar bush here:
brainly.com/question/10018100
#SPJ4
Which Redundant Array of Independent Disks (RAID) combines mirroring and striping and is the better option for mission critical applications?
A. RAID-10
B. RAID-5
C. RAID-1
D. RAID-0
Answer:
RAID-10
Explanation:
In RAID-10, data is mirrored to two or more disks and striped across multiple disks, so that data can be read from multiple disks in parallel, providing improved performance. Additionally, because data is mirrored, the failure of one disk will not result in data loss, as the data can be reconstructed from the other disk(s).
For these reasons, RAID-10 is considered a better option for mission critical applications, as it provides both increased performance and data redundancy. In contrast, RAID-5 provides data redundancy through parity, but does not provide the same level of performance as RAID-10, and can be less reliable in the event of disk failure.
It's worth noting that RAID-10 is generally more expensive than other RAID levels due to the need for multiple disks, but the increased reliability and performance make it a good choice for mission critical applications where data loss and downtime can be devastating.
The Redundant Array of Independent Disks (RAID) that combines mirroring and striping and is the better option for mission critical applications is RAID-10.
RAID-10 combines the features of RAID-1 (mirroring) and RAID-0 (striping) to provide both data redundancy and increased performance. It is often used in mission critical applications because it can withstand multiple drive failures without losing data. RAID-5 also provides data redundancy and increased performance, but it is not as reliable as RAID-10 in the event of multiple drive failures. RAID-1 provides data redundancy but does not offer increased performance, and RAID-0 offers increased performance but does not provide data redundancy.
Learn more about RAID-10 here: https://brainly.com/question/28963056
#SPJ11
the results of the spec cpu2006 bzip2 benchmark running on anamd barcelona has an instruction count of 2.389e12, an executiontime of 750s, and a reference time of 9650s.a. find the cpi if the clock cycle time is 0.333ns.b. find the specratio. c. find the increase in cpu time if the number of instructions of thebenchmark is increased by 10% without affecting the cpi.d. find the increase in cpu time if the number of instructions of thebenchmark is increased by 10% and the cpi is increased by 5%.e. find the change in the specratio for this change.f. suppose that we are developing a new version of the amdbarcelona processor with a 4 ghz clock rate. we have added someadditional instructions to the instruction set in such a way that thenumber of instructions has been reduced by 15%. the executiontime is reduced to 700s and the new specratio is 13.7. find the newcpi.g. this cpi value is larger than obtained in question 6.a. as the clockrate was increased from 3ghz to 4ghz. determine whether theincrease in the cpi is similar to that of the clock rate. if they aredissimilar, why?h. by how much has the cpu time been reduced?i. for a second benchmark, libquantum, assume an execution time of960ns, cpi of 1.61, and clock rate of 3ghz. if the execution time isreduced by an additional 10% without affecting the cpi and with aclock rate of 4ghz, determine the number of instructions.j. determine the clock rate required to give a further 10% reduction incpu time while maintaining the number of instructions and with thecpi unchanged.k. determine the clock rate if the cpi is reduced by 15% and the cputime by 20% while the number of instructions is unchanged
All answers are given below.
Describe CPI?CPI, or cycles per instruction, is a metric used in computer architecture to measure the average number of clock cycles required to execute a single instruction on a processor. It is calculated by dividing the total number of clock cycles used by a program by the total number of instructions executed during that program's execution.
CPI is an important metric because it can have a significant impact on a computer's performance. A processor with a lower CPI will generally be able to execute instructions more quickly, resulting in faster program execution and improved overall performance. Conversely, a processor with a higher CPI will generally be slower and less efficient.
There are several factors that can affect CPI, including the design of the processor, the type of instruction being executed, and the organization of the program being run. Improving CPI typically involves optimizing the processor's design, improving the organization of the program, or using more efficient instruction sets.
CPI is often used in conjunction with other performance metrics, such as clock speed and instruction throughput, to provide a more complete picture of a processor's performance. It is also commonly used in computer architecture research and development to evaluate and compare different processor designs and optimizations.
a. The CPI (cycles per instruction) can be calculated as CPI = execution time / (instruction count * clock cycle time). Plugging in the given values, we get CPI = 750 / (2.389e12 * 0.333e-9) = 1.46.
b. The specratio is defined as the ratio of the reference time to the execution time, so specratio = reference time / execution time. Plugging in the given values, we get specratio = 9650 / 750 = 12.87.
c. If the number of instructions is increased by 10%, the new instruction count is 2.6279e12. The new execution time can be calculated as (new instruction count / old instruction count) * execution time = (1.1) * 750 = 825s, which is an increase of 75s.
d. If the number of instructions is increased by 10% and the CPI is increased by 5%, the new CPI is 1.54. The new instruction count is 2.6279e12. The new execution time can be calculated as (new instruction count * new CPI * clock cycle time) = 2.6279e12 * 1.54 * 0.333e-9 = 1.29s, which is an increase of 540ms.
e. The new specratio can be calculated as reference time / new execution time = 9650 / 1.29 = 7488.37. The change in specratio is the difference between the new and old specratios, which is 7488.37 - 12.87 = 7475.5.
f. The new execution time is 700s and the new specratio is 13.7. We can use the formula specratio = reference time / execution time to find the new reference time, which is 9590s. The new instruction count can be calculated as (0.85) * 2.389e12 = 2.03065e12. The new CPI can be calculated as CPI = execution time / (instruction count * clock cycle time) = 700 / (2.03065e12 * (1/4e9)) = 0.86. The new clock cycle time is (execution time / (instruction count * new CPI)) = 700 / (2.03065e12 * 0.86) = 0.000404s. The new clock rate is 1 / (0.000404s) = 2475.25MHz.
g. The CPI is not directly proportional to the clock rate. While increasing the clock rate can reduce the execution time, it may also require more cycles per instruction due to pipeline stalls, cache misses, or other factors. Therefore, the increase in CPI may not be similar to the increase in clock rate.
h. The CPU time reduction is the difference between the old and new execution times, which is 750 - 700 = 50s.
i. We can use the formula execution time = (instruction count * CPI * clock cycle time) to solve for the new instruction count, given the new execution time, CPI, and clock rate. Plugging in the given values, we get 960e-9 = (instruction count * 1.61 * 1/3e9), so the new instruction count is 1.879e9.
j. If we want to reduce the execution time by 10% without affecting the CPI, the new execution time is 864ns. We can use the formula execution time = (instruction count * CPI * clock cycle time) to solve for the new clock rate,
To know more about instruction visit:
https://brainly.com/question/13166283
#SPJ1
CPI is often used in conjunction with other performance metrics, such as clock speed and instruction throughput, to provide a more complete picture of a processor's performance.
Describe CPI?CPI, or cycles per instruction, is a metric used in computer architecture to measure the average number of clock cycles required to execute a single instruction on a processor. It is calculated by dividing the total number of clock cycles used by a program by the total number of instructions executed during that program's execution.
a. The CPI (cycles per instruction) can be calculated as CPI = execution time / (instruction count * clock cycle time). Plugging in the given values, we get CPI = 750 / (2.389e12 * 0.333e-9) = 1.46.
b. The specratio is defined as the ratio of the reference time to the execution time, so specratio = reference time / execution time. Plugging in the given values, we get specratio = 9650 / 750 = 12.87.
c. If the number of instructions is increased by 10%, the new instruction count is 2.6279e12. The new execution time can be calculated as (new instruction count / old instruction count) * execution time = (1.1) * 750 = 825s, which is an increase of 75s.
d. If the number of instructions is increased by 10% and the CPI is increased by 5%, the new CPI is 1.54. The new instruction count is 2.6279e12. The new execution time can be calculated as (new instruction count * new CPI * clock cycle time) = 2.6279e12 * 1.54 * 0.333e-9 = 1.29s, which is an increase of 540ms.
e. The new specratio can be calculated as reference time / new execution time = 9650 / 1.29 = 7488.37. The change in specratio is the difference between the new and old specratios, which is 7488.37 - 12.87 = 7475.5.
f. The new execution time is 700s and the new specratio is 13.7. We can use the formula specratio = reference time / execution time to find the new reference time, which is 9590s. The new instruction count can be calculated as (0.85) * 2.389e12 = 2.03065e12. The new CPI can be calculated as CPI = execution time / (instruction count * clock cycle time) = 700 / (2.03065e12 * (1/4e9)) = 0.86. The new clock cycle time is (execution time / (instruction count * new CPI)) = 700 / (2.03065e12 * 0.86) = 0.000404s. The new clock rate is 1 / (0.000404s) = 2475.25MHz.
g. The CPI is not directly proportional to the clock rate. While increasing the clock rate can reduce the execution time, it may also require more cycles per instruction due to pipeline stalls, cache misses, or other factors. Therefore, the increase in CPI may not be similar to the increase in clock rate.
h. The CPU time reduction is the difference between the old and new execution times, which is 750 - 700 = 50s.
i. We can use the formula execution time = (instruction count * CPI * clock cycle time) to solve for the new instruction count, given the new execution time, CPI, and clock rate. Plugging in the given values, we get 960e-9 = (instruction count * 1.61 * 1/3e9), so the new instruction count is 1.879e9.
j. If we want to reduce the execution time by 10% without affecting the CPI, the new execution time is 864ns. We can use the formula execution time = (instruction count * CPI * clock cycle time) to solve for the new clock rate,
To know more about CPI visit:
https://brainly.com/question/14453270
#SPJ1
why do entries in a local address resolution protocol (arp) table expire after a short amount of time?
Answer:
to allow for dynamic updates of the network
Explanation:
ARP is used to map an IP address to a physical (MAC) address on a local network, and the ARP table is used to store these mappings for quick access.
However, the physical addresses of devices on a network can change over time, for example due to replacement or failure of a device, or when a device moves from one network segment to another. To handle these changes, ARP entries are set to expire after a certain amount of time, typically a few minutes. This forces the device to send a new ARP request to update the mapping if it needs to communicate with the device again, which helps ensure that the ARP table always reflects the current state of the network.
By having ARP entries expire, the ARP table remains accurate and up-to-date, even in environments where devices are frequently added or removed from the network. This helps ensure that IP-to-MAC mappings are always accurate and helps prevent communication errors.
if your company is using a cloud service provider that manages every aspect of the information system including the application and the data, then you are using a category of cloud service called...
Infrastructure-as-a-Service (IaaS), which provides virtualized computing resources over the internet.
Infrastructure-as-a-Service (IaaS) is a type of cloud computing service that provides virtualized computing resources over the internet. IaaS is typically used for storing and managing data, hosting applications, and providing a platform for development and testing. IaaS providers manage the infrastructure, such as servers, storage, networks, and operating systems, on behalf of the customer. This means that customers don’t need to manage or maintain the underlying infrastructure and can instead focus on their applications and services. IaaS can be used to quickly scale up or down based on customer demand, making it a cost-effective and flexible solution for businesses. Additionally, IaaS providers often offer additional services, such as backup and recovery, to help customers protect their data and increase their security.
Learn more about internet here-
https://brainly.com/question/18543195
#SPJ4
which method of fire alarm signal transmission utilizes two-way analog, addressable, or multiplex signals?
Unlike to conventional systems, which only provide information about areas or zones of a structure, analog-addressable fire alarm systems provide particular information on the positions of individual fire detectors.
Depending on the floor or zone they are on in relation to the emergency, multiplex fire alarm systems enable the simultaneous announcement of many warnings in various zones. According to NFPA 72, the period of time between the activation of a fire alarm signal and the time it is received and confirmed at the central monitoring station shall not exceed 90 seconds. The three most popular ways to send a fire alarm signal are wireless mesh radio technologies, cellular phones, and landlines.
Learn more about analog here-
https://brainly.com/question/18943642
#SPJ4
Which type of end-user license allows a program to be installed on 1 CPU that is not accessed by other users on network?
a. general public
b. network/multiuser
c. individual/multiuser
d. single-user
Individual (Single-user): This licence type enables the usage of the programme on a single CPU without being accessible to other users via a network.
What kind of software licence is restricted to a certain piece of hardware?A software licencing strategy known as "node-locked licencing" assigns a licence for a software programme to one or more pieces of hardware (specific nodes, such as a computer, mobile devices, or IoT device). Any number of instances may typically run under such a licence.
What do node locked and floating licences mean?A licence key that is node-locked can only be used on a specific computer. If you are using a node-locked licence, you do not need to run a licence server.
To know more about CPU visit:-
https://brainly.com/question/16254036
#SPJ4
Is a projector powered by ac or dc?
It may be anywhere in the range of 60 volts. Nevertheless, depending on the kind of projector you have, this component could alter. A projector's brightness level tells you how much electricity it consumes.
Why choose a projector over a television?TVs emit light; projectors reflect it. Reflected light is more pleasant and less taxing. Larger pictures are produced using projectors. Larger graphics facilitate and lighten seeing.
Which device is now more valuable: a projector or a TV?This disparity is getting smaller as TVs get bigger every year, yet a projector delivers bigger displays for less money. Therefore, a projector is usually what you want unless you're streaming 4K content. Projectors make it easier to experience 4K resolution on a large screen.
To know more about projector visit:
https://brainly.com/question/14637513
#SPJ1
how do you display hyperlinks without an underline?
You can display hyperlinks without an underline by using the CSS "text-decoration: none" property. You can add this to the link's CSS selector
a {
text-decoration: none;
}
What is Hyperlinks?
Hyperlinks are pieces of code that allow users to click on text or images, and be taken to a different webpage or document. They are often used to navigate between different webpages within a website, as well as to link to other websites. Hyperlinks can also be used to link to files such as PDFs, Word documents, or even images. Hyperlinks are created using HTML code, which is a type of programming language used to create websites.
To know more about Hyperlinks
https://brainly.com/question/23413848
#SPJ4
a(n) defines the environment in which data can be managed and is used to work with the data in the database.
It provides a way to manipulate the data, such as adding, editing, and deleting records. It also provides a way to search and sort the data, as well as run queries and reports.
What is Data?
Data is information that is collected, organized and analyzed to draw conclusions and inform decisions. Data can be qualitative or quantitative, and it can be collected from a variety of sources, including surveys, questionnaires, polls, experiments, and observational studies. Data can be used to identify trends, relationships and patterns between variables, and it can help to inform decisions in many areas, such as business, economics, and public policy. Data is often visualized to make it easier to interpret, and to help make underlying patterns more clear.
To know more about Data
https://brainly.com/question/30492002
#SPJ4
Manipulating 2D Array
A good example of an implementation of the updateValue method based on the instructions is given below:
scss
public static void updateValue(int[][] array, int row, int col, int value) {
if (row == 0) {
if (col == array[row].length - 1) {
array[row][col] = array.length;
} else if (col == array[row].length - 2) {
array[row][col] = array[0][0];
}
} else if (row == 1) {
if (col == array[row].length - 1) {
int sum = 0;
for (int i = 0; i < array.length; i++) {
sum += array[i].length;
}
array[row][col] = sum;
}
} else if (row == 2) {
if (col == array[row].length - 1) {
array[row][col] = array[0][0] + array[array.length - 1][array[array.length - 1].length - 1];
}
}
}
What is the array about?To use this method to update the values as specified, you would call it like this:
updateValue(array, 0, array[0].length - 1, array.length);
updateValue(array, 1, array[1].length - 1, 6);
updateValue(array, 2, array[2].length - 1, array[0][0] + array[array.length - 1][array[array.length - 1].length - 1]);
Therefore, Note that you would need to replace array with the actual name of your 2D array variable in your code. Also, the hardcoded row values here are just examples based on the assumption that the original 2D array is the one described in the prompt. You would need to adjust the row values to match the specific arrays you are working with in your own code.
Learn more about 2D array from
https://brainly.com/question/26104158
#SPJ1
See transcribed text below
The last element in each array in a 2D array is incorrect. It's your job to fix each array so that the value 0 Is changed to the correct value.
In the first array, the final value should be the length of the 2D array.
In the second array, the final value should be the sum of lengths of the rows (this is also the total number of elements in array!).
In the third array, the final value should be the sum of the first and last values in the 2D array.
Create a method called
updateValue(int[][] array, int row, int col, int value) that sets
the [row][column] to the correct value. Then, call the updateValue method three times once for each value change that you are supposed to make. When inputting values to updatevalue, you will have to hard code the row value, but the column value and the new value should be set so that it will work even if the rows in array are modified.
For example, if we wanted to set the value of the second to last index in the first array to the first element in the 2D array, we would write:
updateValue(array, 0, array[0].length -2, array[0][0])
what will be the answer of this python question with explanation?
for a in range(1,8,1):
print(a,a*a)
Answer:
The Python range() function returns a sequence of numbers, in a given range. The most common use of it is to iterate sequence on a sequence of numbers using Python loops.
Explanation:
make me branliis list pls if you do then thx
A logical function is a function that works with values that are either ____.A. right or wrongB. absolute or relativeC. positive or negativeD. true or false
The correct option is option D, which is A logical function is a function that works with values that are either True or false.
Logical functions are strategies for determining whether a situation is true or false depending on the data and arguments provided. It also aids us in calculating the findings and selecting any of the supplied data. These functions are used to calculate the outcome and assist in selecting any of the given data. The contents of the cell are examined using the relevant logical condition based on the requirement.
In spreadsheets, logical functions are used to determine whether a situation is true or false. You can then choose one of two options based on the results of that test. These choices can be used to display information, perform various calculations, or run additional tests.
Learn more about Logical functions here.
https://brainly.com/question/6878002
#SPJ4
which of the following is incorrect? a select clause specifies the columns to be displayed a from clause specifies the table containing the column(s) listed in the select clause a where clause is used to extract only those records that fulfill a specified condition none of the above
The SELECT clause is used to specify the columns to be displayed in the query result. The FROM clause is used to specify the table or tables containing the columns listed in the SELECT clause. The WHERE clause is used to extract only those records that fulfill a specified condition. All three of these clauses are valid, so the correct answer is "none of the above".
The SELECT clause is used to specify which columns are to be part of the result set of a query. It can specify one or more columns, and can use various operators, such as mathematical operators and comparison operators. The FROM clause is used to specify the table or tables from which the columns listed in the SELECT clause will be extracted. It can also specify joins between tables, and can use various operators, such as join operators and set operators. The WHERE clause is used to extract only those records from the result set that fulfill the condition specified in the WHERE clause. This condition can include comparison operators, logical operators, and various other operators, depending on the query. All three of these clauses are necessary components of a query, and they play an important role in the construction of a query.
the complete question is :
which of the following is incorrect? a select clause specifies the columns to be displayed a from clause specifies the table containing the column(s) listed in the select clause a where clause is used to extract only those records that fulfill a specified condition none of the above
Options :
a select clause specifies the columns to be displayed
a from clause specifies the table containing the column(s) listed in the select clause
a where clause is used to extract only those records that fulfill a specified condition
learn more about query here
https://brainly.com/question/14311643
#SPJ4
write a conditional that decreases the variable shelflife by 4 if the variable outsidetemperature is greater than 90. Prompt for the values of the variables shelfLife and outside Temperature
Here's an example of a Python conditional statement that asks the user for the values of the variables "shelfLife" and "outside Temperature" and then reduces the "shelf Life.
" variable by 4 if the "outside Temperature" variable is more than 90: python Copy the code Prompt the user for the variables shelfLife and outside Temperature values shelf Life = in (input("Enter the shelf Life value: ") outside Temperature = in t(input("Enter the outside Temperature value: Determine whether the outdoor temperature is more than 90 degrees Fahrenheit If the outside temperature is higher than 90 degrees Fahrenheit, reduce shelf Life by 4 -= 4 Print the most recent shelf Life value ("Updated value:", shelf Life The input function is used in this example to prompt the user for the values of the variables "shelf Life" and "outside Temperature". The if condition.
learn more about shelfLife here:
https://brainly.com/question/14844178
#SPJ4
Which of these devices will eventually need to be recycled? Select all that apply.LCD monitortelevisionsmartphonelaptop
All four of the devices listed - LCD monitor, television, smartphone, and laptop - will eventually need to be recycled.
What is recycling?Recycling is the process of reusing materials from products that have reached the end of their useful life, rather than disposing of them as waste. Recycling is important because it reduces the amount of waste in landfills and conserves natural resources.
Here's why each of the devices listed will eventually need to be recycled:
LCD monitor: LCD monitors contain a variety of materials, including plastic, metal, and glass. These materials can be recycled and reused in the production of new products, which reduces the need to extract new materials from the earth.Television: Like LCD monitors, televisions contain a variety of materials that can be recycled. Additionally, many televisions contain hazardous materials, such as lead and mercury, that must be properly disposed of to prevent environmental damage.Smartphone: Smartphones are complex devices that contain a variety of materials, including plastic, metal, and glass, as well as rare and valuable metals like gold, silver, and copper. Recycling these materials reduces the need to extract new materials and helps to conserve natural resources.To know more about recycling , check out :
https://brainly.com/question/2055088
#SPJ1
what is dilations and scale factors independent practice worksheet
A worksheet for students learning about dilations and scale factors in mathematics is probably called "Dilations and Scale Factors Independent Practice Worksheet."
What are scale factors and dilation?The scale factor is defined as the proportion of the new image's size to that of the previous image. A fixed location in the plane serves as the center of dilatation. The scale factor and the center of dilation are used to determine the dilation transformation. The image stretches if the scaling factor is greater than 1.
The scale factor worksheet is what.
The scale factor worksheets aid in students' understanding of geometrical drawings as well as scale drawings and models. The young minds will learn how to compare two figures and comprehend their scale ratio by solving scale factor puzzles.
to know more about the dilations and scale factors here:
https://brainly.com/question/8765466
#SPJ4
what are the possible errors that a reliable data transfer protocol at the transport layer needs to deal with?
A reliable data transfer protocol at the transport layer needs to deal with several possible errors to ensure that the data is transmitted accurately and completely.
The following are some of the possible errors:
Packet loss: Packets may be lost in transit due to network congestion, packet drops, or other issues.Delay: Packets may be delayed in transit, resulting in out-of-order packet delivery.Corrupt data: Packets may be corrupted during transmission due to noise or interference in the network.Duplicate packets: Packets may be duplicated in transit, resulting in redundant data.Out-of-order delivery: Packets may be delivered out of order, resulting in incorrect sequence of data.To deal with these errors, a reliable data transfer protocol needs to include error detection and correction mechanisms such as checksums, acknowledgments, sequence numbers, and retransmission of lost or corrupted packets. These mechanisms ensure that the data is transmitted accurately and completely, and any errors are detected and corrected in a timely manner.
Learn more about network :
https://brainly.com/question/14276789
#SPJ4
Write a program that displays the results of
1+2+3+4+5+6+7+8+9
Let's go through Python
[tex]\tt s=0[/tex]
[tex]\tt for\:i\:in\:range(1,10):[/tex]
[tex]\quad\tt s+=i[/tex]
[tex]\tt print("Sum=",s)[/tex]
The default value assigned to s is 0Loop will call values from 1-9 s will store the sum of all valuesIn the end the sum is printedfind an equivalent function to f which only uses nand and not gates. how many nmos transistors would be needed to implement this function?
An equivalent function to f which only uses NAND and not gates. how many NMOS transistors would be needed to implement this function is F = AB +C.
What is an transistors?A transistor is a specific type of semiconductor device that regulates or controls electrical signals like current or voltage. The word "transistor" is a contraction of the word "transfer resistance." William Shockley, Walter Brattain, and John Bardeen, three American physicists, develop it on December 23, 1947. To move a weak signal from a circuit with low resistance to one with high resistance, a switching device or small device is typically used. Essentially, it is a semiconductor-based component.
F = AB +C
F = [tex]\mathrm{\over AB +C}[/tex]
F = [tex]\mathrm{\over AB.C}[/tex]
To implement CMOS NAND, we need 4 transistors and to implement CMOS NOT gate we need 2 transistors.
From the expression, it is clear that we need two CMOS NAND gates and one CMOS NOT gate to implement it. So, total no. of transistor required in this case =
2×4+2 = 10
Learn more about transistor
https://brainly.com/question/30335329
#SPJ4
for certain services like amazon elastic compute cloud (amazon ec2) and amazon relational database service (amazon rds), you can invest in reserved capacity. what options are available for reserved instances?
Answer:
Standard Reserved InstancesConvertible Reserved InstancesScheduled Reserved InstancesEC2 Instance Savings PlansRDS Reserved CapacityExplanation:
For Amazon EC2 and Amazon RDS, you can invest in reserved capacity to reduce your costs compared to on-demand pricing. The options available for reserved instances are:
Standard Reserved Instances: This is the most cost-effective option for steady-state workloads that run continuously for an entire year or more.Convertible Reserved Instances: This option allows you to change the attributes of your reservation, such as instance type, availability zone, or network platform.Scheduled Reserved Instances: This option allows you to launch instances during specific, recurring time windows.EC2 Instance Savings Plans: This option provides a flexible and cost-effective way to save on Amazon EC2 costs, without making upfront payments or long-term commitments.RDS Reserved Capacity: This option provides a discounted rate for Amazon RDS usage, and you can purchase reserved capacity to reduce your costs.which proc step successfully prints a list of all data sets in the orion library without printing descriptor portions for the individual data sets?
PROC DATASETS with CONTENTS option and NOPRINT successfully prints a list of all data sets in the Orion library without printing descriptor portions for the individual data sets in SAS.
To print a list of all datasets in the Orion library without printing the descriptor portions for individual datasets, you can use the following PROC step in SAS:
PROC DATASETS LIBRARY=Orion NOPRINT;
CONTENTS OUT=Contents(KEEP=MEMNAME);
RUN;
PROC PRINT DATA=Contents NOOBS;
VAR MEMNAME;
RUN;
The PROC DATASETS step with the CONTENTS option creates a new dataset called Contents which contains the names of all datasets in the library. The NOPRINT option prevents the descriptor portions from being printed for individual datasets.
The second PROC PRINT step prints the MEMNAME variable from the Contents dataset, which contains the names of all datasets in the library. The NOOBS option removes the observation numbers from the output.
The CONTENTS option in PROC DATASETS creates a new dataset containing information about the datasets in the library, including the dataset names, labels, formats, and other attributes. The NOPRINT option suppresses the display of the descriptor portion for each individual dataset, reducing the amount of output and simplifying the output.
Learn more about dataset here:
https://brainly.com/question/30154121
#SPJ4
1. Complete the following c programs:
Write a program in c to read n number of values in an array and display it in reverse order.
2.Write a program in c to copy the elements of one array into another.
3. Write a program in c to count a total number of duplicate elements in an array
a program in c to count a total number of duplicate elements in an array.
What is the elements ?Elements are the building blocks of all matter. They are substances that cannot be broken down into any other substances by chemical means. Elements are identified by their atomic number, which is the number of protons in the nucleus of an atom. There are 118 elements known to man, with the most common being oxygen, hydrogen, carbon, nitrogen, and calcium. All elements have unique physical and chemical properties that allow them to combine and interact with other elements in different ways.
To learn more about elements
https://brainly.com/question/26624021
#SPJ1
Hw3. 12. Relative error evaluation as a student who has recently taken cs 357, paul is eager to put his knowledge learned in the class to use in real-world applications. He notices the weather forcast in champaign-urbana area is not very accurate and is determined to make it better. After a summer of hard work, he has finished implementing his new software for predicting wind speed. Eager to test how well his software performs, he uses it to predict the wind speed for the next days and then collects the actual wind data during these days. He stores both his predicted data and the actual data in numpy arrays. To understand how well paul's software performs, write a program to compute the maximum relative error of his prediction across these days. Hint: consider using numpy. Ndarray. Max to compute the maximum value element in an array. The setup code gives the following variables: name type description n int the number of days predicted numpy. Ndarray array of length representing the predicted wind speed for these days actual numpy. Ndarray array of length representing the actual wind speed for these days your code snippet should define the following variables: name type description max rel error float the maximum relative error of paul's prediction across these days
To compute the maximum relative error, we first compute the absolute difference between the predicted and actual wind speeds and divide it by the actual wind speed to get the relative error for each day.
Here's a code snippet in Python that computes the maximum relative error of Paul's wind speed predictions using NumPy:
import numpy as np
# Given variables
n = 7 # number of days predicted
predicted = np.array([10, 12, 8, 14, 16, 9, 11]) # predicted wind speed for these days
actual = np.array([11, 10, 12, 13, 15, 8, 10]) # actual wind speed for these days
# Compute maximum relative error
rel_error = np.abs(predicted - actual) / actual
max_rel_error = np.max(rel_error)
print("Maximum relative error:", max_rel_error)
In this example, we assume that Paul has predicted the wind speed for 7 days, and the predicted wind speeds are stored in the predicted NumPy array. The actual wind speeds for these days are stored in the actual NumPy array.
Learn more about NumPy :
https://brainly.com/question/12907977
#SPJ4
As you learned in Chapter 3, many search tools offer Simple and Advanced Search options. Which of these search options are best to use when you... need more control over how to structure your search. want to do an initial exploration of what's available. want to limit your search to a certain date range. are looking for information on a broad topic.
Following are the type of searches
1. advanced search, 2. simple search, 3. Advanced search, 4. simple search
What is an advanced and simple search?A thorough search of the entire dictionary text is done using the advanced search. Anywhere your term appears in the dictionary, it will discover it. This might appear as the title of an entry, a phrase within the definition of another word, a quotation, etc. Most searches will produce either too many or not enough results. Taking a look at hundreds of records takes a while. You can save a ton of time by making a small effort when creating search strings—what you write into the search box.
The default search box used by the majority of library databases is a straightforward one. All fields of the library database collection are searched for items. All terms or keywords typed in the search field are looked up.
To know more about advanced search, check out:
https://brainly.com/question/20014042
#SPJ1
deletes the variable in which subject5 score is stored. the student is writing the test for subject5 again. what score should the student get in subject5 to get an average score of 95? print the score. is it possible to get that score? print the result.
The Python program to get the scores secured by a student in five subjects namely subject1, subject2, subject3, subject4, subject5 is in the explanation part.
What is programming?Making a set of instructions that instruct a computer how to carry out a task is the process of programming. Computer programming languages like JavaScript, Python, and C++ can all be used for programming.
Here is a Python program that accomplishes the requirements listed in the question. The program assumes that the user will enter valid integer scores between 0 and 100 for each subject.
subject1 = int(input("Enter score for subject1: "))
subject2 = int(input("Enter score for subject2: "))
subject3 = int(input("Enter score for subject3: "))
subject4 = int(input("Enter score for subject4: "))
subject5 = int(input("Enter score for subject5: "))
total_score = subject1 + subject2 + subject3 + subject4 + subject5
avg_score = total_score / 5
if avg_score > = subject4:
print("The average score is greater than or equal to subject4 score")
else:
print("The average score is less than subject4 score")
if subject1 == subject5:
print("Subject1 score is equal to subject5 score")
else:
print("Subject1 score is not equal to subject5 score")
if subject2 < = subject3:
print("Subject2 score is less than or equal to subject3 score")
else:
print("Subject2 score is greater than subject3 score")
del subject5
new_avg_score = (total_score - avg_score) / 4
new_subject5_score = 95 * 5 - total_score + new_avg_score
print("To get an average score of 95, the student needs to score", new_subject5_score, "in subject5")
if new_subject5_score < = 100:
print("It is possible to get that score")
else:
print("It is not possible to get that score")
Thus, the program takes user input for the five subject scores and calculates the average score.
For more details regarding programming, visit:
https://brainly.com/question/11023419
#SPJ1
3. Write a Python program stored in file that:
A.Gets the scores secured by a student in five subjects namely subject1, subject2, subject3, subject4, subject5. Calculate the average score of all the subjects and store it in a variable called avg_score. Note: The scores entered must be greater than zero and the maximum score that the student can score in each subject is 100.
B. Checks if the variable avg_score is greater than or equal to subject4 score and prints the result.
C. Checks if subject1 score is equal to subject5 score and print the result.
D. Checks if subject2 score is less than or equal to subject3 score and print the result
.E. Deletes the variable in which subject5 score is stored. The student is writing the test for subject5 again. What score should the student get in subject5 to get an average score of 95? Print the score. Is it possible to get that score? Print the result.
what property should you set to have the department header section appear at the top of every printed page?
In Design view or Layout view, you can modify the PageHeader property. Every page in a report, including the first and last, often has a report page header printed by Access.
What do the MS Word commands for header and footer mean?A footer is text that appears at the bottom of a page, while a header appears at the top of the page. These spaces are typically used for inputting document information, such as the document's title, chapter heading, page numbers, creation date, and similar items.
How can I use Word to simultaneously put a footer and page number?If necessary, place the pointer to the right of the footer and use the Tab key to navigate to the where you wish the page number to appear. After selecting a number, click the Page Number button and then Current Position. Selecting Bottom of Page will remove the current footer, so AVOID using that option.
To know more about Access visit:-
https://brainly.com/question/29992975
#SPJ1
What are the best steps to learn a 2d animation software?
Answer:
this is the correct answer
How to fix "array must be initialized with a brace-enclosed initializer" ?
The initializer of an array is a set of constant expressions separated by commas and enclosed in braces (). The initializer is preceded by the equal sign (=). An array's elements do not all need to be initialised.
How should an array be initialised correctly?A comma-separated set of constant expressions encased in braces () serves as an array's initializer. An equal sign (=) is placed in front of the initializer.
How do I put zeros into an array in C++?Using the memset() function, which is defined in the string header file, is the quickest way to set all items of an array in C++ to 0. Considering that memset is an intrinsic, the compiler will turn it into assembly instructions making direct use of it highly ideal. Each byte in the array will have the value 0 thanks to memset.
To know more abut array visit:-
https://brainly.com/question/30504837
#SPJ1
you can use the formulas tab to change the excel view, to hide the heading, gridlines and ruler. true/false
False. Accessing many formula-related features in Excel, such as auditing tools, calculation choices, and formula evaluation, is done via the Formulas tab.
Microsoft Excel offers a variety of tools and options for dealing with formulae, functions, and computations in spreadsheets under the Formulas tab. It has a number of groups, including Calculation, Defined Names, Formula Auditing, and Function Library. Users have access to more than 400 built-in functions through the Function Library group, which can process data in a variety of ways. Users have access to named range management and creation through the Defined Names group, which is helpful for formula simplification and comprehension. The Formula Auditing group offers resources for assessing formulas, tracking precedents and dependents, and spotting mistakes. Overall, Excel's Formulas tab is a crucial feature that facilitates users' management and effective use of intricate calculations and operations.
Learn more about Formulas tab here:
https://brainly.com/question/20452866
#SPJ4
which of the following is not correct about an advanced persistent threat (apt)? a. apts are most commonly associated with nation-state actors. b. apts use innovative attack tools. c. once a system is infected by an atp, it silently extracts data over an extended period of time. d. apts require the use of sql injection attacks.
An apts require the use of sql injection attacks is not correct about an advanced persistent threat (apt).
Option D is correct.
SQL: What is it?The special-purpose programming language SQL (Structured Query Language) is used to manage data in relational databases. It is made so that people can query, change, and manage data in relational databases. Millions of users worldwide use it, making it the most popular database language.
SQL can be used to query and manipulate the data that is stored in databases as well as to create, update, and delete databases. Since it is a declarative language, users are able to specify the data they want rather than how to obtain it. Additionally, SQL is a powerful language for combining data from multiple tables, making it possible for users to construct intricate data queries and reports.
Learn more about SQL:
brainly.com/question/25694408
#SPJ4